Cutting Mats

  • RM-IC-C/AQA

    RM-IC-C/AQA

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 450mm x 300mm x 1.5mm(18 x 12)both sides (inches /cm) grids model.

    詳細を見る

  • RM-IC-C/PIK

    RM-IC-C/PIK

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 450mm x 300mm x 1.5mm(18 x 12)both sides (inches /cm) grids model.

    詳細を見る

  • FCM-A2

    FCM-A2

    The multi-purpose 450MM x 620MM sized “folding” mat is good size for carry and storage, and designed for heavy-duty cutting. It can be used with the OLFA utility and art knives, let alone OLFA rotary cutters.

    詳細を見る

  • FCM-A3

    FCM-A3

    The multi-purpose 320MM x 450MM sized “folding” mat is good size for carry and storage, and designed for heavy-duty cutting. It can be used with the OLFA utility and art knives, let alone OLFA rotary cutters.

    詳細を見る

  • RM-30x30

    RM-30x30

    Because of its 360 degrees rotating feature, the RM-30x30 (30cm x 30cm) prevents unwanted movement of the cutting object or makes it unnecessary for the user to move around the object.

    詳細を見る

  • RM-12S

    RM-12S

    Because of its 360 degrees rotating feature, the RM-12S (12" x 12") prevents unwanted movement of the cutting object or makes it unnecessary for the user to move around the object. Inches grid model.

    詳細を見る

  • RM-17S

    RM-17S

    Because of its 360 degrees rotating feature, the RM-17S (17" x 17") prevents unwanted movement of the cutting object or makes it unnecessary for the user to move around the object. Inches grid model.

    詳細を見る

  • RM-CLIPS/3

    RM-CLIPS/3

    Perfect for protecting a large area. The set is designed so that when put together, the mat grid lines run in a uniform number sequence. This 70" x 35" (1800mm x 900mm x 1.5mm) clip set comes with three mats and four clips. Inch grid model.

    詳細を見る

  • RM-CLIPS/2

    RM-CLIPS/2

    Perfect for protecting a large area. The set is designed so that when put together, the mat grid lines run in a uniform number sequence. This 70"x 23" (1800mm x 600mm x1.5mm) clip set comes with two mats and two clips. Inch grid model.

    詳細を見る

  • RM-IC-C

    RM-IC-C

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 450mm x 300mm x 1.5mm(18 x 12)both sides (inches /cm) grids model.

    詳細を見る

  • RM-IC-S

    RM-IC-S

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 600mm x 450mm x 1.5mm (24 x 18) both sides (inches /cm) grids model.

    詳細を見る

  • RM-IC-M

    RM-IC-M

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 920mm x 610mm x 1.5mm (36 x 24) both sides (inches /cm) grids model.

    詳細を見る

  • RM-CG

    RM-CG

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use. 18 x 12 Inch grid model. Rotary mats must be stored flat.

    詳細を見る

  • RM-SG

    RM-SG

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use. 24 x 18 Inch grid model . Rotary mats must be stored flat.

    詳細を見る

  • RM-MG

    RM-MG

    Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use. 36 x 24 Inch grid model. Rotary mats must be stored flat.

    詳細を見る

  • CM-A4

    CM-A4

    Multi-purpose craft mat for general cutting requirement. Double-sided use. 300mm x 210mm x 2.0mm (12" x 8") with a metric grid on one side and an inch grid on the other.

    詳細を見る

  • CM-A3

    CM-A3

    Multi-purpose craft mat for general cutting requirement. Double-sided use. 430mm x 300mm x 2.0mm (17" x 12") with a metric grid on one side and an inch grid on the other.

    詳細を見る

  • CM-A2

    CM-A2

    Multi-purpose craft mat for general cutting requirement. Double-sided use. 600mm x 430mm x 2.0mm (23" x 17") with a metric grid on one side and an inch grid on the other.

    詳細を見る

  • CM-A1

    CM-A1

    Multi-purpose craft mat for general cutting requirement. Double-sided use. 920mm x 610mm x 2.0mm (36" x 24") with a metric grid on one side and an inch grid on the other.

    詳細を見る

  • TCM-S

    TCM-S

    Professional quality translucent cutting mats especially designed for use with OLFA standard-duty cutters, heavy-duty cutters, art knives, rotary cutters and specialty cutters. 450 x 300 x 3mm translucent cutting mat (double-sided use).

    詳細を見る

1 2