PRODUCT GUIDE in digital




The thin design of the GSR-1 makes it possible to ‘go in low’, inclining toward a flat glass surface. Handle and safety blade cover are made of glass-fiber reinforced PP which is known for its strength, rigidity, and acetone-resistance. Not just the blade, but also the blade holding plate and screw are made of stainless steel to make the glass scraper perfect for use with water and dishwashing liquid. Safety blade cover is also essential while storing.

Product information

Product NameGSR-1/3B
PackingBlister Packed


Durable and solvent-resistant

The molding of glass-fiber reinforced polypropylene and elastomer, which excels in strength, durability, and solvent resistance, makes the handle tough enough for professionals.

Easy-to-hold design

The large hole for a firm grip and the distinctive curved design allow to work with various holding styles.

The width of the handle and blade are the same

The handle and blade are designed to be about the same width, allowing intuitive working.

For cleaning around water, and on glass

The stainless steel blade is relatively softer and resistant to rust, making it suitable for working around water and cleaning glass surfaces.

Easy-to-clean stain-resistant structure

All the metal parts are made of stainless steel, and the structure with outlets of water on handle prevents water and dirt from accumulating inside, making it hygienic.

Safety Lanyard Hole

Safety lanyard hole can be used to attach a lanyard, carabiner, or other metal fittings.

Blade Cover

Blade cover is made of glass-fiber reinforced polypropylene and elastomer, which excel in strength, durability, and solvent resistance. Can be taken off with one-touch, and attached to the grip to prevent loss while using.

【How to attach and detach the blade cover】

●When removing the cover from the blade
When starting work, remove it by pulling it away from the handle.

●When attaching the cover during work
When attaching it during work, slide it onto the handle.

How to replace blade

Loosen the screw to slide down the stainless steel plate.

If the stainless steel plate is difficult to slide, tap the handle lightly as shown in the figure after loosening the screw.



Return to product list