Strong slim handle with anti-slip rubber grip

The double injection molding of glass-fiber reinforced polypropylene and elastomer, which excels in strength, durability, and solvent resistance, makes the slim handle tough. The anti-slip rubber grip is easy to hold fitting securely in the hand.

Compatible with Various Holding Styles

The various holding styles allow anyone to work comfortably, regardless of hand size.

For cleaning in tight spaces, around water, and on glass

With a narrow blade and a slim handle, the GSR-2 reaches narrow spaces and corners on a small area such as kitchens. Also, the stainless steel blade is relatively softer and resistant to rust, making it suitable for working around water and cleaning glass surfaces.

Easy-to-clean stain-resistant structure

Blades and metal parts are made of stainless steel, and the structure with outlets of water on handle prevents water and dirt from accumulating inside, making it hygienic.

Safety Lanyard Hole

Safety lanyard hole at the end of the handle can be used to attach a lanyard, carabiner, or other metal fittings, making it useful in a variety of work environments where safety control is strictly required.

Spare blade container doubles as a blade cover

Spare blade container can be set in the handle to prevent loss while using, and can also be used as a blade cover when not in use.

【Cautions for attaching, detaching, and storing the blade container】

(1) To remove the case from the handle, push the case out from the back of the handle with your fingers.
(2) When placing blade container into the handle, push it into the handle until it clicks into place.
(3) To prevent injury, be sure to attach the blade container as a blade cover when not in use. When attaching the blade container to blade in use as a cover, place the blade in the space at the bottom of the case with the OLFA logo and front of the handle facing you. When removing the blade cover from the blade, be careful not to touch the blade.

【How to take out a blade from container】

The OLFA logo side is the lid. When taking out a blade from the container, be careful not to scatter blades. Also, be careful not to touch the sharpening surface of blades.

How to load a new blade

【GSB-2 blade】

1. Loosen the screw.
2. Slide the stainless steel plate toward you.
3. While holding down the stainless steel plate, align the notch on the body with the notch on the blade, and attach the blade.
4. Slide the stainless steel plate back to the original position.
5. Tighten the screws.

【GSB-1 blade (3 blades in 1)】

Spare blade for the GSR-1 can be used by snapping it along the break line with pliers, etc.

Movie