Cutting Mats
-
RM-CLIPS/3
Perfect for protecting a large area. The set is designed so that when put together, the mat grid lines run in a uniform number sequence. This 70" x 35" (1800mm x 900mm x 1.5mm) clip set comes with three mats and four clips. Inch grid model.
-
RM-CLIPS/2
Perfect for protecting a large area. The set is designed so that when put together, the mat grid lines run in a uniform number sequence. This 70"x 23" (1800mm x 600mm x1.5mm) clip set comes with two mats and two clips. Inch grid model.
-
RM-IC-C
Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 450mm x 300mm x 1.5mm (18 x 12)both sides (inches /cm) grids model.
-
RM-IC-S
Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 600mm x 450mm x 1.5mm (24 x 18) both sides (inches /cm) grids model.
-
RM-IC-M
Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use with a metric grid on one side and an inch grid on the other. 920mm x 610mm x 1.5mm (36 x 24) both sides (inches /cm) grids model.
-
RM-CG
Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use. 18 x 12 Inch grid model. Rotary mats must be stored flat.
-
RM-SG
Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use. 24 x 18 Inch grid model. Rotary mats must be stored flat.
-
RM-MG
Professional quality rotary mat especially designed for use with OLFA rotary cutters. Double-sided use. 36 x 24 Inch grid model. Rotary mats must be stored flat.
-
CM-A4
Multi-purpose craft mat for general cutting requirement. Double-sided use. 300mm x 210mm x 2.0mm (12" x 8") with a metric grid on one side and an inch grid on the other.
-
CM-A3
Multi-purpose craft mat for general cutting requirement. Double-sided use. 430mm x 300mm x 2.0mm (17" x 12") with a metric grid on one side and an inch grid on the other.
-
CM-A2
Multi-purpose craft mat for general cutting requirement. Double-sided use. 600mm x 430mm x 2.0mm (23" x 17") with a metric grid on one side and an inch grid on the other.
-
CM-A1
Multi-purpose craft mat for general cutting requirement. Double-sided use. 920mm x 610mm x 2.0mm (36" x 24") with a metric grid on one side and an inch grid on the other.
-
TCM-S
Professional quality translucent cutting mats especially designed for use with OLFA standard-duty cutters, heavy-duty cutters, art knives, rotary cutters and specialty cutters. 450 x 300 x 3mm translucent cutting mat (double-sided use).
-
TCM-M
Professional quality translucent cutting mats especially designed for use with OLFA standard-duty cutters, heavy-duty cutters, art knives, rotary cutters and specialty cutters. 620 x 450 x 3mm translucent cutting mat (double-sided use).
-
TCM-L
Professional quality translucent cutting mats especially designed for use with OLFA standard-duty cutters, heavy-duty cutters, art knives, rotary cutters and specialty cutters. 900 x 620 x 3mm translucent cutting mat (double-sided use).
-
NCM-S
Professional quality cutting mats especially designed for use with OLFA standard-duty cutters, heavy-duty cutters, art knives, rotary cutters and specialty cutters. 450 x 300mm and 3.0mm thick cutting mat (double-sided use).
-
NCM-M
Professional quality cutting mats especially designed for use with OLFA standard-duty cutters, heavy-duty cutters, art knives, rotary cutters and specialty cutters. 620 x 450mm and 3.0mm thick cutting mat (double-sided use).
-
NCM-L
Professional quality cutting mats especially designed for use with OLFA standard-duty cutters, heavy-duty cutters, art knives, rotary cutters and specialty cutters. 900 x 620mm and 3.0mm thick cutting mat (double-sided use).